Navigation:  Data Buffer Help Topics > MDR2000e R2 > Configuration >

Manual Setup

Previous pageReturn to chapter overviewNext page

 

It is highly recommended that configuration of the MDR2000e Release 2 be done using the MDR2000 ZooKeeper Windows Utility Program available on-line at:

 

 http://www.databuffers.com/trhp/mdr2000/v5configuration.exe

 

This program is an easy to use, intuitive utility providing the technician with fast and easy setup and configuration of all aspects of the MDR2000e Release 2.

 

If however it is not possible to use this program, the following instructions describe how to setup and configure the basic settings of the MDR2000e manually.

 

Communications Option Setup:

This document provides the step-by-step instructions necessary to setup the Communications Options. With the new MDR2000e Release 2 there are two methods of configuring the device, via Serial or TCP/IP. If you have a serial connection with the device, you should skip ahead to the Direct Serial Connection section.

 

 Connecting via DHCP

 

 Connecting via Direct Serial Connection
 

 Interactive Configuration

 

 Compatibility Setup